Grinding Wheels - EINHELL TH-MG 135 E Manual De Instrucciones

6.4 Tips
•
Exert only moderate pressure on the workpi-
ece and allow it to be processed at uniform
speed.
•
You will not finish your work sooner by exer-
ting heavy pressure. On the contrary, heavy
pressure will cause the drive unit to slow
down or stop and will overload the motor.
•
For your own safety, use a vise or screw
clamp to secure small workpieces.
•
Precision work / engraving: Hold the drive unit
like a pen.
•
Rough work: Hold the drive unit like a ham-
mer.
7. Accessories
7.1. Accessories (Fig. 7 / Fig. 1; Item 2-3)
1 Grinding wheel
2 Grinding belt (small)
3 Grinding belt (large)
7.2. Accessories (Fig. 8 / Fig. 1; Item 12)
1 Cutting wheel (fi ne)
2 Cutting wheel (coarse)
7.3. Accessories (Fig. 9 / Fig. 1; Item 5)
1 Cutter (cylindrical, large)
2 Cutter (cylindrical, small)
3 Cutter (pointed)
4 Cutter (ball-shaped)
7.4. Accessories (Fig. 10 / Fig. 1; Item 2/6)
1 Grinding wheel
2 Felt polishing wheel
7.5. Accessories (Fig. 11 / Fig. 1; Item 9)
1-5 Grinding pins
7.6. Accessories (Fig. 12 / Fig. 1; Item 4/16/17)
1 Diamond cutting wheel
2 Clamping spindle for diamond cutting wheel
3 Grinding head for grinding belts (small)
4 Grinding head for grinding belts (large)
5 Pot brushes
7.7. Accessories (Fig. 13 / Fig. 1; Item 5/11)
1 Clamping sleeve 0.6-3.2 mm
2 Cutter
Anl_TH_MG_135_E_SPK8.indb 29 Anl_TH_MG_135_E_SPK8.indb 29
GB
7.8. Accessories (Fig. 14 / Fig. 1; Item 4/6/10)
1 Arbor for felt wheels
2 Arbor for grinding wheels
3 Felt polishing wheel
4 Felt polishing wheel
5 Grinding wheel
7.9. Accessories (Fig. 15 / Fig. 1; Item 7)
1-6 Drill bits (1-3 mm)
7.10. Description of the accessories:
Cutting disks:
For cutting metal and plastic.
Insert the cutting wheel onto the clamping spind-
le.
Grinding pins:
In various grinding head shapes.
For grinding and deburring metal and plastic.
HSS bits:
For drilling work on non-ferrous metals, wood,
plastic and printed circuit-boards.

Grinding wheels:

For cleaning and sharpening blades and tools. In-
sert the grinding wheel onto the clamping spindle.
Grinding paper:
For grinding and deburring wood and plastic.
Polishing wheels / polishing pins:
For polishing brass, tin, copper, etc. Also for use
with polishing pastes.
Wire brushes:
For cleaning stone, metal, aluminium, etc.
Grinding belts:
For grinding word and plastic.
Diamond cutting wheel:
For cutting, separating, grinding and deburring
materials, such as concrete, stone, china, cera-
mic, etc.
Sleeves:
Various sizes for mounting diff erent accessory
tools.
Cutters:
For cutting plastic, wood and soft metal
- 29 -
29.10.12 13:27 29.10.12 13:27