Gameron 13665 Manual De Instrucciones página 3

ruction
3. Turn on your TV and select the appropriate channel for the type of signal you
duct.
4. Turn on your PSP™ Slim or PSP™ 3000; navigate the menus to "Settings"
IMPORTANT
1. Never connect both sets of video output cables (composite and component) at
2. Select composite or component video output depending on the desired
3. Check that the AV/COMPO switch is set appropriately for the connected cables.
4. Check that an appropriate channel is selected on your TV for the type of video
5. If display problems occur, verify the connections and the steps above and
Warranty
This product is guaranteed for three (3) years from the date of purchase. In the
event of product failure resulting from material or manufacturing defects during
this period, the retailer who sold the product will replace this product with an
identical or similar model upon presentation of the cash register receipt or valid
ockets on
proof of purchase. This Warranty does not cover damage resulting from accidents,
incorrect use, or any use for which this product was not designed.
- Component:
Connect the blue, green and red cables.
Connect the red and white audio cables (L & R) to the audio input sockets on
your TV.
chose.
and then "Connected Display Settings" to change the console's video output.
Refer to your PSP™ manual for further information.
once.
resolution and available video input sockets on your TV.
output you have chosen (ex: AV1, AV2, EXT1, EXT2, etc.).
consult the manuals for your TV and PSP™.
2