Introduction:
Security colour camera in weatherproof housing for outdoor use.
Also suitable for use indoor. Compact design. Supplied with power
supply and bracket for wall or ceiling mounting.
Installation:
Mounting:
See the fi gure for installing the camera to the wall or ceiling.
Lens adjustment:
If the image is not sharp, it can be adjusted as described in following
steps (see also fi gure below)
1. Lift the rain and sun cover of the camera (or remove it).
2. Rotate the front cover counter clockwise to take it off.
3. Turn the lens gently clockwise or counter-clockwise until the
image is sharp.
Note: for adjustment the camera needs to be connected to a
monitor.
4. Rotate the front cover clockwise to replace it to the camera. Be
sure it's tightened well to avoid moisture or water getting into the
camera.
Lens
2