Pairing Procedure - Cloogy RENEWABLES UPGRADE Guía Rápida De Instalación

5
Click Add Device and type your Transmitter Generation's ID.
Choose the option Cloogy Transmitter Generation and click
Add.
Your Transmitter Generation will show up on the devices list
with a red status (not paired). Follow the next steps to pair your
Transmitter Generation and your Cloogy kit.
®
6

Pairing Procedure

1. Next to your Transmitter Generation status click the Pair
button.
2. Wait for the message "Pairing new devices is now available"
to appear and that the circle starts to turn green.
3. Insert the batteries into the Transmitter Generation and wait
for the message "Device paired successfully" to appear.
4. If that message does not appear until the circle changes to
blue, press the button located on the front of the Transmitter
Generation until the message appears.
5. When the message "Device paired successfully" appears the
pairing process is complete.
6. The message "Pairing new devices is no longer available. If
the device has not been paired successfully, please repeat the
process" must appear afterwards.
11