Cloogy RENEWABLES UPGRADE Guía Rápida De Instalación página 13

7. Refresh the Cloogy
portal webpage. Your Transmitter
®
Generation status should be green. If it is orange bring the
Transmitter Generation closer to the Hub or vice versa.
7
Locate your microgeneration switchboard cabinet and turn
EN
off the general circuit breaker. If you have any questions or
do not feel capable of installing your Cloogy please contact
®
our Customer Support Service.
VPS is not responsible by any eventual damage and/or injury
during the installation process.
8
Remove the protective panel from your microgeneration
switchboard.
9
Identify the neutral wire of your microgeneration
switchboard that comes out of the residual-current device
(usually a blue wire).
12