Página 1
Bunk Bed with Storage Bins Twin Twin Black Weight Limit: Thank you for purchasing from DHP! Upper Bed: 200 Lbs / 91 Kgs Lower Bed: 225 Lbs / 102 Kgs Storage Bin: 20 Lbs/ 9 Kgs each DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and Call our toll free number if you need assistance. agrees to remedy any such defect. This warranty covers one year from the date of Work in a spacious area and near where the unit will be used, preferably on a original purchase.
Página 3
Parts Replacement Parts, Visit www.dhpfurniture.com/eng/replacement-parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Post Post Guard Rail Support Before you throw the package, please use the T947840 T947850 T921710 T947860 Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Página 4
Parts Replacement Parts, Visit www.dhpfurniture.com/eng/replacement-parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Slats Slat Spacer Plastic Plug Slat Spacer Before you throw the package, please use the T919600 T919490 T392590 T919480 Check Box to identify the parts and ensure that X 44...
Hardware Pack Hardware Pack #: T4132019WE-00 1/4" X 3/4" 5/16"X 3/4" X 24 X 16 1/4" X 1 1/16" 1/4" X 1 3/16" 1/4" X 2 9/16" Please do not completely tighten all the hardware, Wrench until the entire assembly is complete, unless 1/4"...
Página 6
Step 1 Attach one of I and T to A and B with Don't assembly the remaining I, T, A and B in this step. The holes should be close to part A.
Página 7
Step 2 Attach the other I and T to remaining A and B with The holes should be close to part B...
Página 8
Step 3 Line up the two Insert M x 2 onto A and B . holes at each place...
Página 9
Step 4 Wide side of the slot should be facing up ! Attach G x 2 and J x 2 to A and B with X 16...
Página 11
Step 6 Attach E to G with Then a ttach E to A, B and M with...
Página 12
Step 7 Attach Z x 2 to I and T with Note: For your safety, make sure the ladders are orientated with these two rungs towards the bottom side as illustrated.
Página 13
Step 8 Insert O into J and G as illustrated. Then lock O into place with Y.
Página 14
Step 9 Press W onto O approximately in the middle as illustrated. Press Q onto W alternating left and right.
Página 15
Step 10 Unfold S as illustrated, then place U on the bottom of S.
Página 16
Step 11 Place sub-assembly S/U x 6 from previous step onto L as illustrated...
Storage Bin: 20 Lbs/ 9 Kgs each location. Your DHP furniture can be disassembled and reassembled to move. Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement.
Página 18
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts. Replacements parts, including additional guardrails, may be obtained from DHP. Use of a night light may provide added safety precaution for a child using the upper bunk.
Página 19
Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su DHP garantiza que este producto est libre de defectos de f brica en la mano de obra piso y su producto.
Partes Instrucciones Paso 1 Piezas de reemplazo, visite www.dhpfurniture.com/spa/replacement-parts Una uno de los I con T en A y B con No la asamblea los restantes I, T, A y B en este paso. Todo se incluye en 1 caja grande! Paso 2 Una ei otro I y T en los restantes A y B con Hay 1 caja(s) interna(s) que incluyen los componentes necesarios para...
Página 21
Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicaci n. Precauc on Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de mudanza. Siga la informaci n sobre las advertencias que aparecen en el extremo superior Algunas partes han sido pre-ensambladas en este producto.
Página 22
Travailler dans un endroit spacieux et pr s du lieu o l'unit sera utilis e, pr f rablement sur un tapis, ou sur un morceau de l'emballage pour prot ger le DHP garantit que ce produit est exempt de tout vice de mat riaux et de fabrication et plancher et le produit.
Página 23
Pi ces Instructions Pi ces de rechange, visitez www.dhpfurniture/fre/replacement-parts tape 1 Attacher dans laquelle I et T A et B avec Tout dans 1 grosse bo te! Ne reste pas assembl e le reste I, T, A et B dans cette tape. tape 2 Il y a des bo tes int rieures qui contiennent les composants pour completer Attacher les autres I and T...
Interdire d'avoir plus d'une personne sur le lit du haut. Utilisez toujours l' chelle pour monter ou descendre au lit du haut. Ne substituez pas de pi ces. Communiquez avec DHP pour obtenir des pi ces de rechange. Les pi ces de rechange, y compris les garde-corps, peuvent tre obtenues en contactant DHP.