Mopar 82213169AB Instrucciones De Montaje página 2

1. Disconnect the negative battery cable.
2. Raise and support the vehicle.
3. Remove the three fasteners (2) that secure each
front wheel house splash shield to the front fascia
assembly.
4. Pull back on the front wheel house splash shield and
remove the fastener (1) that secures the front fascia
assembly to the fender.
5. Repeat the removal steps for the opposite side.
6. Remove the fasteners (1) that secure the rear belly
pan (2) to the underside of the vehicle.
Pull the rear belly pan (2) rearward to detach
7.
from the front belly pan and remove from the
vehicle.
1/23/2012 Page 2 of 27 K6861535