Publicidad
•
Warning •
Avvertenze
EN_IMPORTANT, RETAIN FOR FUTURE
REFERNCE: READ CAREFULLY.
• Check the box contents.
• To avoid damaging the cot during
assembly,
please
packaging materials on a clean, flat
surface.
• ATTENTION!
performed by an adult only.
• IMPORTANT: To assemble the cot
correctly, carry out the assembly
operations in the indicated order.
Incorrect assembly operations could
make the cot unsafe.
• WARNING: Be aware of the risk of open
fire and other sources of strong heat,
such as electric bar fires, gas fires, etc.
in the near vicinity of the cot.
• WARNING! Do not use the cot if any
part is broken, torn or missing and
use only spare parts approved by the
manufacturer.
• WARNING! Do not leave anything in the
cot or place the cot close to another
product, which could provide a foothold
or present a danger of suffocation
or strangulation, e.g. strings, blind/
curtain cords, etc..
• WARNING! Do not place more than one
mattress in the cot.
• The product is ready for use only when
all locking mechanisms are engaged.
Make sure they are securely engaged
before use.
• Remove the holder when the cot base is
in the lowest position.
• The lowest position is the safest and
that the base should always be used in
that position as soon as the baby is old
enough to sit up.
• If you leave the child unattended in the
cot, always make sure that the movable
side is closed.
• Important when choosing cot mattress;
There has to be at least a 500 mm
distance between the upper surface of
the mattress and the upper border of
Avvertissement •
remove
all
Assembly
must
Advertências •
the bed sides (highest position in case
of adjustable bedside heights) when the
the
cot base is fixed in its lowest position.
There has to be at least a 200 mm
distance between the upper surface of
be
the mattress and the upper border of
the bed sides (highest position in case
of adjustable bedside heights) when the
cot base is fixed in its highest position.
• This cot requires a 124x63 cm mattress.
Maximum mattress thickness: 12 cm.
• The dimension shall take into account
that there shall be no gap more than
30 mm between the mattress and the
sides end ends in any position of the
mattress.
• Periodically check that the screws are
tightened correctly.
• Should any screws be loose, tighten
them to avoid the risk that any object
(necklaces,
remain entangled and pose a risk of
strangulation.
• In order to prevent falls, when baby can
climb out of the cot, stop using the cot
itself.
• Use only spare parts supplied or
authorized by the manufacturer.
• Correct use and maintenance will make
the cot durable and safe over time.
• Clean with a damp cloth or neutral
detergent (NO SOLVENTS) and allow to
dry in the air.
Advertencias •
Προειδοποιήσεις
clothes,
etc.)
could
Publicidad
