Descargar Imprimir esta página
Safety 1st HS035 Guia De Inicio Rapido
Safety 1st HS035 Guia De Inicio Rapido

Safety 1st HS035 Guia De Inicio Rapido

Cerrojo del horno

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

WARNING:
• Maximum oven temperature not to exceed 500°F
(260° C) when using the lock. DO NOT use the oven's
self-cleaning mode while the lock is installed.
Parts List:
A
Oven door lock
Tools Needed:
•
 M easuring tape
To Install
BEFORE YOU BEGIN: Clean all surfaces that the lock will be adhered to,
including the top of the oven door and the underside of the oven. After
cleaning, wipe with isopropyl (rubbing) alcohol and dry thoroughly.
Oven lock will not adhere properly if any grease is present.
1

 R emove paper backing from adhesive (Figure 1).
2

Locate the center of oven door. Position lock at center (Figure 2).
3

 L ift lock up so that adhesive lightly sticks to the top (Figure 3). Then
open oven door to adhere lock firmly in position.
4

Test lock to be sure it is firmly in place.
1
Using Oven Lock
TO UNLOCK: Slide lock to the right, and lift hinge up 90°.
TO LOCK: Close oven door. Rotate hinge down in front of
oven door. Latch will click into place.
Care and Cleaning
•
 W ipe clean. Keep free of grease.

C AUTION: This product is only a deterrent. It is not a
substitute for proper adult supervision. Discontinue
use when child becomes old enough to defeat it.
Test oven lock before each use.
A
2
3
Oven Door
Lock
HS035
Keep These Instructions
For Future Use
• Read all instructions
before using.
• Remove all contents
from packaging and
discard box, and/or
poly bags.
• Do not return this
product to the place
of purchase. If any
parts are missing, email
consumer@djgusa.com,
call Consumer Relations
at (800) 544-1108, or fax
at (800) 207-8182. You
can also visit our web site
at www.safety1st.com.
Have the model number
ready (HS035) and date
code (manufacture date)
located on the product.
©2010 Dorel Juvenile Group.
All Rights Reserved. Todos
derechos reservados. Tous
droits réservés.
www.djgusa.com
(800) 544-1108
www.safety1st.com
Made in CHINA. Fabriqué
CHINE. Hecho en CHINA.
Styles and colors may vary. Les
styles et les couleurs peuvent
varier. Los estilos y los colores
pueden variar.
Distributed by (distribué par)
(distribuido por) Dorel Juvenile
Group, Inc., 2525 State St.,
Columbus, IN 47201-7494
Dorel Distribution Canada,
873 Hodge, St. Laurent, QC
H4N 2B1
11/15/10 4358-5108A

Publicidad

loading

Resumen de contenidos para Safety 1st HS035

  • Página 1 Have the model number Test lock to be sure it is firmly in place. ready (HS035) and date code (manufacture date) located on the product. ©2010 Dorel Juvenile Group.
  • Página 2 Puis ouvrez la porte du four afin de faire adhérer le verrou fermement dans sa position. Notez le numéro de Vérifiez le verrou pour vous assurer qu’il est bien en place. modèle (HS035), ainsi que le code dateur (date de fabrication) indiqué...
  • Página 3  L evante el cerrojo de manera que el adhesivo se adhiera ligeramente Tenga a mano el número a la parte superior (Figura 3). Luego abra la puerta del horno para fijar de modelo (HS035) y el firmemente el cerrojo en posición. código de fecha (fecha de  P ruebe el cerrojo para asegurarse de que esté...