Philips Wardrobe Care GC9950 Manual Del Usuario página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
EnGlish
10
8
Press the iron power-on button to activate the steam generator.
The 'iron ready' light starts to flash.
,
After approx. 2 minutes the 'iron ready' light stops flashing and lights
,
up continuously to indicate that the steam generator is ready for use.
9
Press the steam trigger to start steam ironing.
Never direct the steam at people.
10
If you want to iron in the board blowing or suction mode, press
either the blowing or the suction button on the iron.
Note: The blowing mode provides a cushion of air that prevents shine and
seam imprints.
Note: The suction mode holds the garment flat and neat on the board, and
makes perfect pleats on trousers.
Note: The blowing or suction mode cannot be switched off.
Tip: Use the shoulder-shaped end of the ironing board when you iron a shirt.
This special feature enables easy ironing with less rearranging.
11
You can store the hot iron in the heat-resistant storage
compartment immediately after you have switched off the iron.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wardrobe care gc9945Wardrobe care gc9940

Tabla de contenido