Tripp-Lite SRWO12US2 Manual Del Propietário página 4

Installation/Wall-Mounting
3
Install wall-mount brackets onto the support surface using lag bolts (not included).
Lag Bolts (Not Included)
4
Install the swinging door by pushing the spring-loaded hinge pins against the ramps on the front mounting rails.
Hinge pins are built into both
sides of the top and bottom of
the door to enable mounting the
hinge to the right or the left.
The slot can be used to keep the
hinge pin in the open position.
B
A
4
Detailed
installation view
A
B