Defi Nitions: Safety Guidelines; Ec Declaration Of Conformity; General Power Tool Safety Warnings - DeWalt D21583 Traducido De Las Instrucciones Originales

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
WARNING: Identify additional safety
measures to protect the operator from
the effects of vibration such as: maintain
the tool and the accessories, keep
the hands warm, organisation of work
patterns.
Fuses:
Europe
230 V tools
U.K. & Ireland
230 V tools
NOTE: This device is intended for the connection to
a power supply system with maximum permissible
system impedance Zmax of 0.25Ω at the interface
point (power service box) of user's supply.
The user has to ensure that this device is connected
only to a power system which fulfils the requirement
above. If necessary, the user can ask the public
power supply company for the system impedance at
the interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DIAMOND DRILLING MACHINE
D21583
D
WALT declares that these products described
E
under "technical data" are in compliance with:
2006/42/EC, EN60745-1:2009 +A11:2010,
EN60745-2-1:2010.
These products also comply with Directive
2004/108/EC (until 19.04.2016), 2014/30/EU (from
20.04.2016) and 2011/65/EU. For more information,
10 Amperes, mains
please contact D
refer to the back of the manual.
13 Amperes, in plugs
The undersigned is responsible for compilation of
the technical file and makes this declaration on
behalf of D
Markus Rompel
Director Engineering
D
WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
05.03.2015

General Power Tool Safety Warnings

SAVE ALL WARNINGS AND INSTRUCTIONS
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a)
b)
c)
WALT at the following address or
E
WALT.
E
WARNING: To reduce the risk of injury,
read the instruction manual.
WARNING! Read all safety warnings
and instructions Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
FOR FUTURE REFERENCE
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
ENGLISH
29

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

D21583k t-1D21583k t-2

Tabla de contenido