Technical Data; Defi Nitions: Safety Guidelines - DeWalt D21441 Traducido De Las Instrucciones Originales

EN GLI SH
ROTARY DRILL D21441
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most
E
reliable partners for professional power tool
users.

Technical data

Voltage
(U.K. & Ireland only)
Type
Power input
No-load speed
1st gear
2nd gear
Maximum drilling range
in steel/wood/concrete
Chuck spindle thread size
Collar diameter
Maximum chuck capacity
Weight
Level of sound pressure according to EN 60745:
(sound pressure )
L
PA
K (sound pressure
PA
uncertainty)
L (sound power)
WA
K (sound power
WA
uncertainty)
Vibration total values (triax vector sum)
determined according to EN 60745:
Vibration emission value a
h
Drilling into metal
=
a
h,D
Uncertainty K =
Vibration emission value a
Screwdriving
a =
h
Uncertainty K =
20
Fuses:
Europe
U.K. & Ireland
U.K. & Ireland
The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given in
D21441
EN 60745 and may be used to compare one tool
V 230
with another.
V 230/115
It may be used for a preliminary assessment of
2
exposure.
W 770
min 0 - 1,100
-1
min 0 - 2,700
-1
mm 13/35/–
UNF 1/2" x 20
mm 43
mm 13
kg 2.3
dB(A) 89
dB(A) 3
dB(A) 94
dB(A) 3
Defi nitions: Safety guidelines
m/s² 3.5 The defi nitions below describe the level of
severity for each signal word. Please read the
m/s² 1.5
manual and pay attention to these symbols.
h
m/s² < 2.5
m/s² 1.5
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
115 V tools 16 Amperes, mains
WARNING:
● The declared vibration emission level
represents the main applications of
the tool. However, if the tool is used
for different applications, with different
accessories or poorly maintained, the
vibration emission may differ. This
may signifi cantly increase the
exposure level over the total working
period.
● An estimation of the level of exposure
to vibration should also take into
account the times when the tool is
switched off or when it is running but
not actually doing the job. This may
signifi cantly reduce the exposure level
over the total working period.
● Identify additional safety measures to
protect the operator from the effects of
vibration, such as: maintain the tool
and the accessories, keep the hands
warm, organisation of work patterns.
DANGER: Indicates an imminently
hazardous situation which, if not
avoided, will result in death or serious
injury.