Connecting
Be sure to turn the power on after connecting external devices.
➢
1) Connecting to the HDMI
Connect the HDMI cable between the HDMI OUT jack on the
MR-16SB2 and the HDMI IN jack on the TV.
➢ This product does not support connecting a HDMI splitter to the
HDMI port.
2) Connecting to the Component
Connect the component cables between the COMPONENT OUT
jacks on the MR-16SB2 and the COMPONENT IN jacks on the TV.
Supply power to the MR-16SB2 and TV after making all the
connections.
Please be sure to match the color coded terminals and cable jacks.
3) Connecting to the Optical
Connect an Optical Cable between the "DIGITAL AUDIO OUT
(OPTICAL)" jacks on the MR-16SB2 and the Digital Audio Input
jacks on the Digital Audio System. When a Digital Audio System is
connected to the "DIGITAL AUDIO OUT (OPTICAL)" terminal: Adjust the volume level with the system'
s volume control.
Updating Contents
1) Connecting to a USB Memory Device
• Connect a USB memory device to USB host before power on.
• Select the Copy in the Home menu.
• Select the file or folder to be copied.
* The selected list is not kept when the directory is changed.
• The selected files are copied to the HDD when Play Selected is
selected.
* Avoid shock to the unit or do not disconnect a power cord until
copy is complete.
2) Connecting to a PC
• Connect the USB cable between the USB jack on the MR-16SB2
and USB jack of PC to copy the video files from your PC.
* MR-16SB2 is compatible only with Windows XP.
• When the unit's HDD is identified on your PC, you may copy or
delete the video files in the unit's HDD in the same manner as you
would operate on your PC.
* Copy commercial images (png) into the "banner" folder.
Otherwise, you cannot play the banner files using MR-16SB2.
• When you are done copying or deleting the files, it is recommended to safely remove the unit's
HDD.
English - 5