Raider RDI-HD50 Manual Del Usuario página 14

14 www.raider.bg
11. Depth.
With the help of depth akutratno can adjust the depth of the bores.
12. Modes of operation.
WARNING! NEVER change the behavior AT WORK THE MACHINE!
- Mode "Hammer drilling"
Press the release button and turn the switch operating modes into position
(fig.1)
- Mode "Chiselling"
Press the release button and turn the switch operating modes into position
(fig. 2)
- Mode "Drilling"
Press the release button and turn the switch operating modes into position
(fig. 3)
- Mode "Setting the drill"
Press the release button and turn the switch operating modes into position
(fig. 4)