Raider RDI-ID37 Manual Del Usuario página 11

General guidelines for safe operation.
Read all instructions carefully. Failure of the
nature following instructions can cause electric
shock, fire and / or severe injuries. Keep these
instructions in a safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit.
Disarray and poor lighting may contribute to the
occurrence of an accident.
1.2. Do not operate in an environment where
the electric drill with an increased risk of an
explosion in the vicinity of flammable liquids,
gases or powders.
During operation of the electric drill can be
separated sparks that can ignite powders or
fumes.
1.3. Keep children and bystanders at a safe
distance while working with the electric drill.
If your attention is diverted, you may lose
control over the electric drill.
2. Safety when working with electricity.
2.1. Plug of the electric drill must be suitable
for contact. In no case is allowed to modify
the structure of the plug. When working with
electrical zero, do not use plug adapters.
Using original plugs and sockets reduces the
risk of electric shock.
2.2. Avoid touching your body to earthed
bodies, eg. pipes,
refrigerators. When your body is grounded, risk
of electric shock is greater.
Protect your electric drill from rain and
moisture.
Penetration of water into the electric drill
increases the risk of electric shock.
2.3. Do not use a power cord for the purposes
for which it is not provided, eg. to bear the
electric drill for cable or removing the plug from
the outlet. Protect cords from heat, oil, contact
with sharp edges or points of mobile machines.
Damaged or twisted cables increase the risk
of electric shock.
2.4. When working with drill out, switch the
machine only in installations equipped with
electric switch Fi (safety shut-off switch with
Residual protection), and current leakage, which
is triggered when DTZ must be no more than 30
mA, according to "Regulation 3 device for the
electrical equipment and power lines. Use only
extension, suitable for outdoor use. Using the
extension, designed for outdoor use reduces the
risk of electric shock.
2.5. If you require the use of the electric drill
and in moist environment, plug the machine only
heaters, stoves
in installations equipped with electric switch Fi.
Use of such a safety switch utechni currents
reduces the risk of electric shock.
3. Safe way of working.
3.1. Be concentrated, watch their actions
carefully and act cautiously and prudently. Do not
use the electric drill, when you are tired or under
the influence of drugs, alcohol or narcotic drugs.
A moment of distraction at work electric drill
may have the effect of extremely serious injuries.
3.2. Work with protective work clothing and
always with safety glasses.
Wearing suitable for drilling and the activities
of personal protective equipment, such as
respiratory masks, healthy, tightly closed shoes
grapple with a stable, protective helmet and
silencers (hearing protectors), reduces the risk
of accident.
3.3. Avoid the danger of incorporating the
electric drill inadvertently. Before you turn the
plug into the power supply network, make sure
the trigger switch is in position "off". If, when you
carry the electric drill, keep your finger on the
trigger switch, or if you submit a voltage of the
electric drill, where it is included, there is the risk
of accident.
3.4. Before you turn on the electric drill, make
sure that you have removed all of her utilities and
and wrenches.
Utilities, forgotten rotating unit can cause
injuries.
3.5. Avoid unnatural positions of the body.
Work in a stable position of the body at any
time and keep the balance. So you can control
the electric drill better and safer if unexpected
situations arise.
3.6. Work with appropriate clothing. Do not
operate with loose clothing or ornaments. Keep
your hair, clothes and gloves at a safe distance
from rotating units of the electric drill. Robes,
attire, long hair can be caught and carried away
by chuck.
3.7. If possible use an external aspiration
system, make sure it is switched on and
functioning properly. Use of the aspiration
system reduces the risks due to the discharge
dust at work.
4. Care to drill to hit.
4.1. Do not overload the electric drill. Use only
the electric drill in accordance with its intended
purpose. Will operate better and safer when
using the appropriate electric drill manufacturer
in the specified range of load.
4.2. Do not use electric drill, whose starting
11