Tools Needed - Uline H-2540 Instrucciones De Montaje

TOOLS NEEDED

Electric Drill 1/4" Drill Bit
1. Drill a 1/4" diameter hole into the concrete, block or
stone to a depth of 2½". (See Inset A)
2. Blow out the dust in the hole.
3. Place bracket over tubing.
PAGE 2 OF 6
MOUNTING (OPTIONAL)
Hammer
Inset B
4. Drive the spike flush to clamp into drilled hole.
(See Inset B)
5. Repeat on remaining spikes.
1-800-295-5510
uline.com
Inset A
2½"
0721 IH-2540