Utilitech NT15-20A Manual Del Usuario página 5

9. This heater draws 12.5 amps in operation. To prevent overloading a
circuit, do not plug the heater into a circuit that already has other
appliances working.
10.CAUTION: It is normal for the plug to touch warmly, however, loose fit
between the AC outlet and plug may cause overheating and distortion
of the plug. Contact a qualified electrician to replace loose or worn
outlet.
11.To disconnect the heater, first to turn off the heater. Never pull the
cord directly.
12.Do not insert foreign objects into any ventilation or exhaust openings
to avoid an electric shock, fire, or any unexpected damages.
13.CAUTION: Plug heater directly into a wall outlet, do not plug the cord
with an extension cord or relocatable power tap (outlet/power strip).
14.Heater has heat, arcing and sparking parts inside. Do not use it in the
areas where gasoline, paint, or flammable liquids are used or stored.
15.Use this heater only as described ways in this manual. Any other use
is not recommended to avoid fire, electric shock, or injury to persons.
16.Even if the output of this heater may vary, its temperature still may be
intense enough to burn exposed skin. It is not recommended for
person with reduced sensitivity to heat or an inability to react to avoid
burns.
17.To prevent a potential fire, do not block air intakes or exhaust in any
manner. And do not use on cloth surfaces such as a bed, which may
cause serious accident.
SAVE THESE INSTRUCTIONS
5