bosal 005-318 Instrucción De Montaje página 4

6. Bring the end of cable set marked R to the right tail lamp:
a) Disconnect 5-way connector in vehicle and join it with fitted connector from cable set,
b) Join remaining 5-way connector from cable set to right tail lamp connector.
7.
Bring another end of cable set to the left tail lamp:
a) Disconnect 5-way connector in vehicle and join it with fitted connector from cable set,
b) Join remaining 5-way connector from cable set to left tail lamp connector.
8. Connect brown and whit
the eyelet terminal with sheet metal screw, do not secure the hole with anti-corrosion remedy).
9.
Trailer power supply:
Refer to 13-pin version only. 3-pin connector housing (red/blue, yellow, and
expanded socket functions. Put this part of cable set behind the trim. To expand socket functions it is necessary to
order the following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Secure the cable set with supplied cable ties, re-install all trims and other parts which were removed during instal-
lation.
Connect the earth lead to the battery and check all vehicle functions with connected trailer or suitable testing devic.
cables (only in 13-pin sets) to earth (for instance drill the 3mm hole and connect and fix
.
brown cables) is provided for
part no. 014-169
part no. 015-069