Cornwall Electronics DESHUM12 Manual De Instrucciones página 20

6.
This indicator with 3 functions as below:
1. When the power is on, it shows indoor humidity
2. When you adjust humidity, it shows the selected humidity data
3. When set the timer on/off, it shows the timer data.
Control Panel:
1. Power
Press this button to turn on /off the unit. Do not unplug the power cord directly
to force the machine to stop working.
When plugging the unit for the first time the buzzer will sound buzz. Press
to turn on the unit and the primary humidity is 60%, also with low fan speed.
2. Timer button.
24 hours timer
Press this button to set timer on/off, if you would like to cancel timer setting, press
this button to 00 shown from display.
3. Humidity setting button.
Press this button to exit the CNT mode, and enter the AUTO mode: when
the ambient humidity is below the set humidity the unit will shutdown, when
the ambient humidity is above the set humidity, the unit will resume to start.
The initial humidity is 60%RH, press this button , the double "8"display will
show as following:
When the setting humidity is "--%", the system will in CNT mode, after 5 seconds,
the HUM indication light will off, and the CNT indication light will 8 on.
5 seconds after the humidity set, the double "8"display shows the ambient
humidity. Long press this button 3seconds will show the ambient temperature.
4. Fan speed setting button.
Press this button to adjust the fan speed between HIGH, LOW fan speed.
Display.
20