HOW TO USE
water lid by turning it clockwise.
D. Connect to power supply and turn on the switch. Setting proper mist intensity by
turning the mist intensity controller.
6. CLEANING AND MAINTENACE
A. WATER TANK
a. The water tank should be cleaned frequently. It is recommended to clean once every
3 days.
b. Water should be changed frequently. It should not be kept in the water tank more than
2 days.
B. TRANSDUCER
Due to geographic factors, water quality may differ from place to place. Some places
have hard water, which contains a large quantity of calcium and magnesium ions.
Furthermore, the use of bleaching power (to purify water) also increases the hardness
of water. When this kind of water is used to humidify the air, calcium and magnesium
ions are diffused together with the mist. As time goes on, there will be sediments of scale
on the object surfaces and ground. Meanwhile, there will also be sediments on the
transducer and the water groove, which is to affect the functioning of the humidifier. To
clean the transducer, please
a. Add some cleanser (about 0.5g) on the transducer, add some water, and wait for 2-5
minutes.
b. Use a soft brush to clean the surface of the transducer. Don't use hard tools to scratch
its surface.
c. Use cleanser as packed with the appliance or other scale cleansers to be purchased
in the market.
d. Do not use soap or other alkaline substances to clean the transducer.
C. BASE
a. If the water groove and water level detector have scale sediments too, please use the
cleanser to clean, and then wash the water groove with clean water.
b. Do not immerse the base in water and make sure that no water enters the vent.
7. STORAGE
The original package is the best to store the unit. Make sure to clean all the parts and
have them dried before storage. Meanwhile, please loose the silicon washer to secure
its service life.
8. DO YOU KNOW?
Do you know that different places have different humidifies and, objects need their own
humidifies too? Please find the following:
- 8 -