Mopar 82212376AB Manual De Instrucciones página 4

9. Remove the six screws (1) that secure the front
belly pan to the underside of the vehicle's front
fascia.
10. Remove the six screws (2) that secure the front
belly pan to the underside of the vehicle's front
wheel house splash shield.
11. Remove the four push pin fasteners (3) that
secure the front belly pan to the underside of the
vehicle's lower crossmember.
12. Remove the belly pan from the underside of the
vehicle.
13. If equipped, disconnect the harness (2) from the
fog lamp (1). Repeat on the opposite side.
14. If equipped, disconnect the adaptive speed control harness near the RH fog lamp.
5/25/2011 Page 4 of 30 K6860996