Aigostar 32HGT Manual Del Usuario página 7

 Before using the unit, make sure that the operating voltage of the unit
corresponds to the voltage of the electric network.
 Insert the plug into the socket.
 Press ON/OFF button for 2-3 seconds. The LED screen will illuminate, and
the plates will readily heat up and be ready for use within seconds.
 Separate a section of hair approximately 5cm in width and smooth it out
with a brush.
 Place the chosen section of hair between the plates of the straightener and
close the plates. Take care not to touch the very hot plates.
 Hold the straightener in place until the hair is fully heated this will be
almost instant. When holding the straightener always ensure fingertips are
placed away from the hot plates.
 Once the hair is heated, holding the hair taut, carefully slide the plates
along the selected section of hair, in one smooth movement all the way
down the ends.
 Keep the strands of hair smooth whilst you work, to avoid ridges half way
down.
 As with all straighteners that reach salon high temperatures, do not use
frequently to avoid damaging your hair.
 During the using, you can use the up and down temperature control to
select your desired setting(120℃,140℃,160℃,180℃,200℃,220℃). The
5