English - Kenwood CG600 Serie Manual De Instrucciones

safety
G Only use this appliance for its
intended domestic use.
G Never use a damaged appliance.
Get it checked or repaired: see
'service'.
G Never put the appliance in water or
let the cord or plug get wet – you
could get an electric shock.
Unplug;
G
before cleaning
G G
after use
G G
Never leave the machine on
G
unattended.
Don't let infirm people use the
G
appliance without supervision.
Don't let children play with this
G
appliance.
Keep children away from the
G
appliance. And never let the cord
hang down where a child could
grab it.
Never grind anything other than
G
roasted coffee beans. Grinding other
substances, such as nuts, spices,
un-roasted beans may damage the
grinding mechanism.
Avoid contact with moving parts.
G
The motor should not be allowed to
G
run for longer than 1 minute without
a rest.
before plugging in
Make sure your electricity supply is
G
the same as the one shown on the
underside of your machine.
G
This machine complies with
European Economic Community
Directive 89/336/EEC.
before using for the first time
1 Remove all packaging and labels.
2 Wash the parts: see 'care and
cleaning'.
3 Wind excess cord around the cleats
on the underside of the coffee
grinder.

English

key
cover
hopper
grind settings
settings indicator
indicator lights for number of
coffee cups selected
power on button
button to decrease number of cup
settings
Start/Stop button
button to increase number of cup
settings
hopper safety interlock
coffee outlet
power unit
cord stowage
cleaning brush
safety interlock for collecting vessel
collecting vessel
collecting vessel lid
to grind beans
1 Remove the cover and place the
coffee beans into the hopper, up to a
maximum capacity of 280g can be
accommodated.
2 Re-fit the cover.
3 Fit the collecting vessel and its lid.
4 Select the grind setting. As a guide
use a fine setting for espresso, a
medium setting for cafetiers and filter
machines and a coarse setting for
percolators. Turn the hopper
clockwise to select a finer setting
and anti clockwise to select a
coarser setting. The settings
indicator on the body of the coffee
grinder should align with the desired
grind setting marked on the hopper.
5 Plug into the power supply.
6 Select the desired number of cups of
coffee that is required. This should
be used as a guide only, as it will
vary depending upon taste, type and
roast of the bean and the grind
selected.
2