Product Feature; Applicable Models; Specification; Appearance - Mitsubishi Electric PAC-SF46EPA Manual De Instrucciones

Ocultar thumbs Ver también para PAC-SF46EPA:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42

2 Product Feature

2-1. Applicable models

• Super Y Series(PUHY-YSMF-B, PUHY-YSMC)
• Lossnay unit
• Centralized controller
Do not supply power to any other models.

2-2. Specification

Source power requirement
Voltage/current of output on the
transmission booster side
Environmental condition
Dimensions
Weight
Installation Environment

2-3. Appearance

Cable fixture
TB1
Power line terminal

3 Installation

3-1. Parts prepared at site

Please prepare the following parts before installation of the unit.
Preparation parts
M4 screw × 4pcs
Unit fixing screw
Power cable/
Please prepare the power cable complied with your applicable technical standard in consider with power requirement of
Protective earth cable
the unit.
*Recommend type; ø1.6mm (2.0 mm
*The sticking by ring crimp terminal for wiring. (Hole diameter: M4)
Note: The power supply should comply with local specifications.
Main power switch
Qty.: 1pc
(Circuit breaker)
Type: 250VAC, Single-phase 50/60Hz, 3A
*Recommend type; CP30-BA series(MITSUBISHI ELECTRIC) or equivalent.
Note: The power supply should comply with local specifications.
Transmission cable
Type of the cable; Sheathed vinyl cords or cable which comply with the following specifications or equivalent.
• CPEVS
• CVVS
*CPEV; PE insulated PVC jacketed shielded communication cable
*CVVS; PVC insulated PVC jacketed shielded control cable
*The sticking by ring crimp terminal for wiring. (Hole diameter: M3)
4
Input voltage
AC220V-AC240V; 0.7A (Maximum loading) 50/60Hz Single-phase
Fuse: 2.0A F (IEC127-2)
DC28V-30V 1.7A (Maximum loading)
Temperature
Operating
Non operating
Humidity
30-90%RH (No condensation)
340 (High) × 360 (Width) × 59.2 (Depth) mm
3.5 kg (7.8 pounds)
Indoor
TRANSMISSION BOOSTER
MODEL
PAC-SF46EPA
220-240V:0.7A ~/N
POWER RATING
50
WEIGHT
3.4kg
MADE IN JAPAN
2
) - ø2.0mm (3.2 mm
ø1.2mm - ø1.6mm
1.25mm
2
- 2mm
2
0-40˚C (32-104˚F)
-20-60˚C (-4-104˚F)
360
240
UP
Specification
2
) (Example: H03VV-F, H03VVH2-F, H05VV-F, H05VVH2-F)
TB3
M-NET Transmission
terminal block 2
TB2
M-NET Transmission
terminal block 1
Cable fixture

Publicidad

Tabla de contenido
loading

Tabla de contenido