Introduction; System Overview; Manual Overview - Supelco Spectroquant Manual Del Usuario

1 Introduction

1.1 System Overview

The Spectroquant
module allows the user to connect a specific USB printer, serial printer or a
PC using a USB connector. The Data Transfer is a middleware to transmit data
received on the IR interface to a USB or RS232 interface as per users selection.
If a PC is used to receive data from Data Transfer the USB port should be
used. If a colorimeter is connected, it transmits test results through infrared
according to the test method. The Data Transfer receives the data through
infrared and transmits them to one of the following channels depending on
the user's selection:
EN
• USB printer with HPPCL up to version 5 (HP Deskjet 6940)
• USB COM Class (PC)
• RS232 connection (serial interface)*
All three interfaces can be connected at power up. The interfaces can be selected
by pressing the SELECT key of the Data Transfer. On power up the last selected
interface is active.
* All ASCII printer with serial interface can be used.

1.2 Manual Overview

This manual serves as a reference for Data Transfer users. User must have
prior knowledge of using Windows based applications. The shown screenshots
are created using Windows XP. If other operating systems are used differences
can occur.
4
Data Transfer receives data on an infrared interface. This
®