Changing Batteries - Alpha IP WRC2 61001 Manual De Instrucciones

Alpha IP WRC2 61001
26

Changing batteries

Display Meaning
6x long flashing, red Device defective
8 Changing batteries
Flashing codes at the device, or the symbol
nalises low battery voltage. Replacing the batteries:
1. Pull the device from the frame and the mounting plate (see „Teach-
in of the device" page 21).
2. Remove the batteries from the back of the device.
3. Insert two new batteries of the type R03/Micro/AAA according to
the marking.
4. Install the interchangeable frame onto the mounting plate.
5. Position the device onto the mounting plate and latch it into the clips.
9 The device is now ready to operate.
DEU ENG FRA
FIN SWE POL
Solution
• Observe the indi-
cation in the app.
• Have the device
checked by a spe-
cialist dealer.
• Replace the device.
in the Alpha IP app, sig-
NDL ITA ESP
RUS
DAN/NOR