Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Connect black 3-input casing to micro switch-key on the side of socket:
a) Assemble connection socket with packing washer using enclosed screws and nuts on socket holder,
b) Carefully fasten washer in the appropriate way,
c) Fasten electric bunch in such a way that there are no sharp bends and no wear.
7.
Draw end of bunch marked L to left standing lights:
a) Disconnect 6-input side joint from standing lights and connect with suitable joint in electric bunch,
b) Connect remaining joint of electric bunch to standing lights.
8.
Draw end of bunch marked R to right standing lights:
a) Disconnect 6-input side joint from standing lights and connect with suitable joint in electric bunch,
b) Connect remaining joint of electric bunch to standing lights.
9.
Trailer power supply:
Only for 13-polar version. 3-input housing (red/blue, yellow, white/brown, white/brown leads) is provided for
expanded socket functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to
order the following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Assembly instruction for the customer.
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
part no. 014-169
part no. 015-069
Publicidad
