Descargar Imprimir esta página

Maintenance Instructions - Desoutter Nano 6 I/O Manual De Instrucciones

Publicidad

● Open Internet Explorer or another browser
software. Type the IP Address of your Micro
"http://192.168.10.58/" into the address bar at
the top and hit the Return key.
● Click "Device Configuration".
● Change the IP Address as required.
● Enter the password "private" and click
'Reboot'.
● Ping the new IP address to check the
connection is successful.
● Go back to the "Network and Sharing Center"
and change your computer's Ethernet port to
its initial address.

MAINTENANCE INSTRUCTIONS

Maintenance should be performed by qualified
personnel only.
According to Directive 2012/19/
CE concerning Waste Electrical and
Electronic Equipment (WEEE), this
product must be recycled.
● Contact your Desoutter
representative or consult the website
"www. desouttertools.com" to find out
where you can recycle this product.
09/2017
9 / 16
6159922290_04

Publicidad

loading

Este manual también es adecuado para:

Micro 16 i/o m12 connector61593632706159363240