MiLAN 152016 Manual Del Usuario página 9

SWITCH DESCRIPTION:
1. Switch A:
. UP : Rounding UP.
. 5/4 : Rounding off.
. CUT : Rounding down.
2. Switch B:
. F : Floating decimal point.
. 4.2.0 : Indicates 4,2 or 0 decimal:
. A
DD2
is automatically set to 2.
(for instance, if you key in ".", then this position is
the base). This feature is only effective for addition
and subtraction.
LCD DISPLAY DESCRIPTION:
GRAND TOTAL : GRAN TOTAL sign, indicates that the GT
memory is active.
MEMORY : Independent Memory sign, indicates that the
Independent Memory is active.
- : Negative Sign.
ERROR : Error sign, when the display shows "E", you can
press to clear the error.
: this indicates that the number of decimals
7