Ritter LY9601KH Manual Del Usuario página 12

GB
Power supply unit
• Protection class: II (S6)
• IP protection class: IP20
Details
Name or trade mark
of manufacturer, trade
registration number and
address
Model identification
Input voltage
Input AC frequency
Output voltage
Output power (Po)
Average efficiency in operation
Efficiency at light load (10%)
Power consumption at no load
All spotlights are fully charged on delivery.
Only use the charger supplied.
DO NOT switch the light on when in charging mode.
Never use a modified or damaged charger.
Never charge the spotlight for more than 24 hours.
Never repair/open the spotlight.
Recharge the spotlight every 6 months.
LED (7) lights up red during the charging process and changes to green when the battery
is fully charged.
Cleaning
• Allow the luminaire to cool down sufficiently!
• Clean with a dry or slightly moist, clean, lint-free cloth and a mild detergent if required. Do not
use cleaners that contain abrasives or solvents.
Maintenance
• Replace any damaged protective panels immediately (S7).
• Remove all dirt from the housing or protective panel immediately, as this can lead to overheating.
• The light source of this luminaire is not replaceable; if the light source has reached the end of its
service life, the entire luminaire must be replaced.
12
Power supply for type
LY9601KH
XingYuan
Electronics Co. Ltd.;
No.227 of Xiasha Road,
Shipai Town,
523350 Dongguan City,
Guangdong Province,
People's Republic of China;
Trade registration number:
91441900678830497F
XY06J-1200500Q-EW
230V
50Hz
12,0V DC
6,0W
80,3%
-
0,04W
Power supply for type
LY9602KH + LY9603KH
Dongguan Yingna Electronic
Technology Co., Ltd.;
401, 4/F, No.4 Zhenrong
Road, No. 6 Industrial Zone,
Caiwu,Wusha, District,
Changan Town, Guangdong,
People's Republic of China;
Trade registration number:
91441900699758834P
YN-15WA130080EU
230V
50Hz
13,0V DC
10,4W
84,5%
75,8%
0,07W