Restore Settings; Phone - TUBI T7 Manual Del Usuario

automatically locked when the phone enters the standby screen and has not
been used for a period of time.
Press the left soft key + * key to unlock it.

4.4.1.5 Restore settings

You can use this option to reset the phone to the factory state or only
to the default setting. You should input your phone password first, then you
can operate this function. Phone default password is: 0000.
When the phone is reset to the factory state, all the data will be deleted.

4.4.2 Phone

Call setting
You can choose to set the call waiting, sending this phone number,
any key to answer, call time reminding, automatic redial, automatic answer,
answer reminding, cost setting, IP number and call group of card 1 and card
2.
——Call waiting: Switch on/off call waiting function. And choose inquiry
to check current call waiting state.
——Call identity: Select on or off sending native number.
——Any key answer: Select on or off any key answer.
——Minute reminder: Select set call time remind.
——Auto redial: Set on or off automatic replay.
——Auto answer: Set on or off automatic answering (Note:headphones
mode supports this feature).
——Answer reminder: Set a reminder when answering.
——Cost settings: For phone card settings.
——IP number: Set the IP number.
——User group: Conversation group settings.
Call divert
Divert all voice calls: under this function, all incoming calls will be
diverted into the phone number you have set.
Divert if unreachable: under this function, incoming calls will be diverted
into the phone you have set.
Divert if no answer: under this function, incoming calls will be diverted
into the phone you have set.
Divert if busy: under this function, incoming calls will be diverted into the
phone.
Divert all calls: divert if incoming call is digital. (supplier's support
needed.)
Cancel all divert: cancel all call divert.
59