Video Recorder - TUBI T7 Manual Del Usuario

Effect: Blur, common, monochrome, brown, negative, sketch, paint,
——
mosaic and serration.
Continues: The number can be set to take pictures in the viewfinder
——
screen can be switched directly to the number "5" key.
Timer: To set the time . Press key "1" to switch directly at the
——
camera point interface.
White balance: you can set the color viewfinder screen, the
——
viewfinder screen directly by the number "4" button to switch.
Banding: can be set to 50Hz or 60Hz. Press key "7" to switch
——
directly at the camera point interface.
Sound: You can set the camera sound on or off. Press key "2" to
——
switch directly at the camera point interface.
EV: Viewfinder screen can be set focal length
——

4.6.2 Video recorder

Before using the video camera function, please make sure that your
storage card has already been inserted. The video will be stored in your
storage card in the form of 3GP.
Enter the video viewfinder interface and press OK key to start.
You can also press other icons to achieve a variety of different
operations.
Open the setting function
Enter the video browsing interface
Switch to the camera
Back
In the video camera interface, you can achieve the following setting
functions: video size, video quality, night scene, special effect, white
balance, flash frequency, audio effect, file size limit, video time limit, EV
value.
Video size: CIF (352x288), QCIF(176x144).
Video quality: high, low, standard. Press key "5" to switch directly at
the video point interface.
Night mode: on, off. Press key "3" to switch directly at the video point
interface.
Special effect: blur, common, monochrome, brown, negative, sketch,
paint, mosaic, serration.
White balance: auto, cloudy, daylight, fluorescence, white light. white
light. Press key "4" to switch directly at the video point interface.
Banding: 60 Hz, 50 Hz.
Sound: on, off. Press key "2" to switch directly at the video point
interface.
62