Swivel Adjustment; Seat Lowering; Tilt Adjustment; Height Adjustment - ISRI 6860 NTS2 Manual De Instrucciones

For your safety, and for the safety of other drivers, the seat can only be adjusted while seated and when
the vehicle is fully stopped and the hand brake is pulled.
INSTRUCTION MANUAL ISRI 6860/875
3

Swivel Adjustment

Serves as an help when entering and leaving the vehicle and preserves the
seat cushions's edge. Furthermore it enables the driver to take a frontal direc-
tion also during jobs on the side like collecting.
Press switch and swing the seat. The seat can only be locked facing the en-
gine. Turn the seat slowly to the locking position, to avoid a damage of the
blocking catch and the stop.
4

Seat Lowering

Enables the drivers to enter and to leave the vehicle much easier.
Protects the seat cushion´s side edge by reducing load and friction.
Press button down:
Seat moves downwards to the lowest position for easy exit and easy entry.
Press button up (when seat is lowered):
Seat returns by memory function to the previously set position.
Such a completely lowered seat is not allowed for driving because there is no
air suspension available in that position.
Before driving, the seat must be removed to the previously set position by
pushing the button up.
This lever is not a height adjustment (see below).
5

Tilt Adjustment

Enables the driver to reduce the load on the underside of the thighs and
the back, respectively the intervertebral disc. The load depends on the incli-
nation of seat and backrest.
Pull lever and adjust the tilt by loading/unloading the front seat cushion area.
After this the backrest shall be readjusted to an upright position.
Make sure that you adjust the seat inclination to a position, where you can
reach and press the pedals to the stop without effort.
The Backrest must not touch the cabin wall after adjustment.

Height Adjustment

6
It supports the driver to reach the pedals comfortably and to pass through all
the way without force.
Pull lever and adjust the desired height.
The higher the seat is lifted, the harder he will be suspended.
The hardness can be readjusted by control „damper adjustment".
Don`t adjust the height so low that on rough roards the seat can knock through.
Adjust the seat height in such a way, that the occupant on each road condition
has enough head clearance to the ceiling of the cabin.
Pedals must be actuated without stretching the legs completely.
19