Before Using For The First Time; Important; Operating Instructions; User Maintenance Instructions - CHEF-BUILT CHP-80 Manual De Instrucciones

BEFORE USING FOR THE FIRST TIME

1. Carefully unpack the Hot Plate and remove all packaging and materials.
2. Place the Hot Plate on a dry, clean and flat surface.
3. Make sure the heating control dials are in the OFF position. Plug the Hot Plate
into a 120V AC 3-prong electrical outlet.
4. Turn the heating control dials to HIGH. Both red power lights will illuminate.
5. Allow the Hot Plate burners to operate empty for 10 minutes to burn off any
manufacturing residue.
NOTE: You may notice a slight odor; this is normal and should quickly disappear.
The burner may appear to turn red if no pot or pan is placed on the hot plate
during the heating process.
IMPORTANT: With the exception of the initial burn-off, NEVER turn any burner
ON without placing a pot or pan onto the heating plate.

OPERATING INSTRUCTIONS

IMPORTANT: Use pots and pans that are flat and stable with a base size no larger than
the heating plate.
CAUTION: Avoid using pans that are unstable and easily tipped.
CAUTION: Avoid dropping items onto the heating plate.
1. Wipe excess water/condensation off pots, lids, and utensils prior to use. Place
pots and/or pans in the center of the burner.
2. Make sure both heating control dials are in the OFF position.
Plug the Hot Plate into a 120V AC electrical outlet.
3. Turn both heating control dials to select from 4 heating mode selections:
WARM, LOW, MEDIUM and HIGH. Both red power lights will illuminate.
4. This appliance is equipped with TURBO settings on one side.
The TURBO option will enable extra power for rapid heating.
Note: As the unit shares the energy, the TURBO setting will rapidly heat up the
burner on 1 side and compensate the temperature on the other side by reducing
the heating function to a WARM or LOW setting.
5. When cooking is complete, turn both heating control dials to OFF, then remove
the plug from electrical outlet.
CAUTION: Make sure hot pots or pans do not touch the base, as this could
damage the surface.

USER MAINTENANCE INSTRUCTIONS

This appliance requires little maintenance. It contains no user serviceable parts. Do not
try to repair it yourself. Contact a qualified appliance repair technician if the product
requires servicing.
SO-315338_18078_Chef-Built_Single Hot Plate_CHP-80_Sensio_IM_R5.indd 5
5
2018-08-10 2:46 PM