Using Menu System; Picture; Picture Mode; System Settings Menu - TCL 48P1CFS Guia Del Usuario

Chapter 4

Using Menu System

This section explores the system settings menu of your
TV. Each menu is outlined and detailed to help you get
the most from your TV. Please note that some function
might be unavailable in certain input source. To access
the menu system:
1. Press MENU on remote control to display the main
menu.
2. Press ◄/► to select Picture, Sound, Channel,
Network, Settings or System, then press OK to
enter the submenu.
3. In the submenu, press ▲/▼ to select menu options,
press ▲/▼/◄/► to set functions or change values,
press OK to open the corresponding submenu or
activate a setting.
4. To return the previous menu, press BACK. To close
the menu, press EXIT.
Note: Figures and illustrations in this User Manual are
provided for reference only and may differ from actual
product appearance. And for some models, certain
options are not available.

Picture

Picture Mode

Back Light

Brightness

Contrast

Saturation

Sharpness

50

Hue

50

Col. Temp

Warm

Active Backlight

Screen Mode

16:9
Advanced Setting
This menu allows you to adjust each option to obtain the
best picture settings according to your preference, the
type of program of you are watching and the ambient
lighting.
Press MENU to display the main menu and select
Picture, then press OK to confirm. The Picture options
are as follows:
Note: Some options may be not available for certain
signal sources.
Picture Mode
Press OK to enter, and then press ◄/► to select a
picture mode: Vivid, Normal, Mild or User.
Note: Picture Mode will be automatically set to User
if you make any adjustment to the following picture
options.

System Settings Menu

Back Light
Adjusts the brightness of the back light, depending on
room lighting.
Brightness
Adjusts the brightness of the picture.
Contrast
Adjusts the difference between light and dark areas of the
picture.
Saturation
Adjusts the richness of color.
Sharpness
Adjusts the crispness of the edges in the picture.
Hue
This option adjusts the balance between the red and
green levels.(Note: the function is available under ATV
and AV NTSC)
Col. Temp
Select the color temperature: "Normal, Warm, Cold,".
Active Backlight
Automatically adjusts the back light, depending on room
lighting. Press OK to enter, and then press ◄/► to select
On or Off.
Note: If you adjust the Back Light option, Active Backlight
will be automatically set to Off.
Screen Mode
Press OK to enter, and then press ◄/► to select a screen
mode: Auto, 16:9, 4:3, or Just Scan.

Advance Setting

The options are as follows:
Note: Some options may be not available for certain signal
sources.
- Dynamic: Adjusts the contrast automatically. Press ◄/►
to select On or Off.
- DNR: Improves the quality of the picture in the case of
poor reception. Press ◄/► to select Off, Low, Medium,
or High.
17