Appendix; Common Problems; Display Information - Huskee VULKANO Manual De Instrucciones

If there are not setting when connected with USB data cable, the phone will enter
the state of charge.

5.2 Appendix

5.2.1 Common problems

Ø The phone can't be powered on.
When the battery voltage is too low, it may cause the phone can't be powered
on. Please charge the battery.
Ø Some callings are limited.
Please confirm whether you have call limit, if you set the call limit, you can't
call or only can call the specific number.
My phone was answered by other persons.
Ø Please confirm whether you set the call forwarding, if you have set it, the call
will be transferred to a specific setting.

5.2.2 Display information

During the operation, the following error information may be displayed:
Ø Please insert the SIM card
Please confirm whether you have inserted SIM card. If your card has been
inserted but can not be used, please try to use a dry cloth to wipe the gold part of
SIM card, then insert SIM card again, if it still can't be used, please contact your
system supplier.
Ø No network
If you locate in the area that has no network coverage, or there is a physical
obstruction between the transmitter and you, such as the hermetic space, the
standby screen will show no network, you can't dial or answer the phone. You can
try to close the window where there is network coverage.