Ingersoll Rand 40PSQ1 Manual De Operación Y Mantenimiento página 3

Torque Adjustment
To adjust the torque on these Twin Blade Impulse
Wrenches, proceed as follows:
1. Remove the Socket Plug.
2. Rotate the Drive Shaft until the Torque Adjustment
Screw is visible in the opening. (There is colored paint
in the head of the Torque Adjustment Screw.)
3. Using a 1.5 mm hex wrench, rotate the Torque
Adjustment Screw clockwise to increase torque. To
decrease torque, rotate the Torque Adjustment Screw
counter-clockwise. Do not rotate the Oil Plug.
4. Replace the Socket Plug.
Make all final adjustments at the job.
ADJUSTMENTS
Model
40PSQ1
45PS3
45PSQ1
55PS3
55PSQ1
70PS3
90PS4
Tested in accordance with PNEUROP PN8NTC1.2
Tested in accordance with ISO8662
3
Sound Level
dB(A)
Pressure Power
74.4 ---
80.3 ---
80.3 ---
81.3 ---
81.3 ---
82.7 ---
92.8 ---
Vibration
Level
m/s 2
0.8
0.5
0.5
0.7
0.7
0.8
1.6