Safety Precautions - Panasonic KY-R647EL Instrucciones De Instalación Y Funcionamiento

Safety Precautions

In order to prevent accidents or injuries to the users, other people, and damage to
property, please follow the instructions below�
■
The following charts indicate the degree of damage caused by wrong operation�
WARNING
CAUTION
■
The symbols are classified and explained as follows�
Stop using the unit when
abnormality / failure occurs and
turn 'OFF' the power switch or
pull out the 3 pin plug�
Example of abnormality / failure:
•
Abnormal noise or heat.
•
Abnormal emission of smoke, fire.
•
Fire or oil ignition.
The unit must be grounded�
Plug the power cord to socket
outlet with grounding continuity
terminal�
Improper grounding could cause
electric shock.
The means for disconnection
must be incorporated in the fixed
wiring in accordance with the
wiring rules�
This appliance is necessary to
allow disconnection from the
supply after installation� The
disconnection may be achieved
by having the plug accessible or
by incorporating a switch in the
fixed wiring in accordance with
the wiring rules�
EN-2
All manuals and user guides at all-guides.com
Indicate serious injury or death�
Indicate risk of injury or property damage�
These symbols
indicate prohibition�
WARNING
Make sure to follow these instructions
This symbol indicates requirement
that must be followed�
This appliance is not intended
to be operated by means of an
external timer or a separate
remote-control system�
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard�
Be sure to disconnect the Power
Plug from the wall outlet or switch
OFF the external switch before
maintenance, repair or service�
Also, do not handle the Power Plug
or external switch with wet hand�
When disconnecting the Power
Plug, hold the plug itself� Do not
pull the cord in anyway� The cord
may be damaged and may cause
fire or electric shock�
Insert the Power Plug firmly,
otherwise it may cause fire or
electric shock�
Clean the Power Plug regularly,
otherwise, it may cause
insufficient insulation due to
moisture, and may cause fire�