Specifications; Operation - Denios SHW M Manual De Instrucciones

Specifications

Safe working load: 1000 kg

Operation

Please observe the following instructions for working safely with the pallet truck.
•
The pallet truck must only be used by trained persons.
•
The given bearing capacity refers to an evenly spread load.
•
If the forks of the pallet truck are not being used they are to be brought into the lowered position!
Choose the desired working position on the handle switch H106 as on Fig. 1
Raising the forks
- Lever in lift position
- By up and down pumping movements with the tow handle the load can be lifted to the desired height
Lowering the forks
- Lever in lower position
- The forks go slowly down
Moving the load
- Lever in neutral position
When moving the load the forks must be only slightly raised
Take care to load correctly as on Fig. 2
Scheren-Gabelhubwagen SHW M
157619
Seite 9 von 19 Seiten
FIG: 2
Ausgabe 05/2010