ASROCK Z590 Phantom Gaming-ITX/TB4 Manual De Instrucciones página 34

Step 5
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw
as this might damage the module.
NUT2 NUT1
*Please skip step 5 if your M.2
heatsink comes with these two
rubber pads.
Step 6
2
2
1
Tighten the screw with a screwdriver
to secure the M.2 heatsink into
place. Please do not overtighten the
screw as this might damage the M.2
heatsink.
30