Tabla De Contenido; Machine Data; Technical Specifications; Safety Instructions - Ferm HAM1014 Traducción Del Manual Original

HOT AIR GUN
The numbers in the following text correspond
with the pictures at page 2
Always read the instruction for electrical
products carefully before use. It will help
you understand your product more
easily and avoid unnecessary risks.
Keep this instruction manual in a safe
place for future use.
Contents
1. Machine data
2. Safety instructions
3. Using the appliance
4. Maintenance

1. Machine data

Technical specifications

Voltage
Frequency
Power input
Weight
IP Class
Position I
Air flow
Air temperature
Position II
Air flow
Air temperature
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
All manuals and user guides at all-guides.com
Contents of packing
1
1
1
1
1
1
Product information
Fig. A
1. Switch
2. Ventilation slots
3. Nozzle outlet

2. Safety instructions

Explanation of the symbols
220-240 V~
50 Hz
2000 W
0.62 kg
IP 20
Additional safety instructions
300 l/min When using electric tools, basic safety
450 °C precautions should always be followed to reduce
the risk of fire, electric shock and personal injury.
500 l/min Read all these instructions before attempting to
600 °C operate this product and save these instructions.
Before using the appliance
•
•
•
•
•
•
•
•
Hot air gun
Deflector nozzle
Fishtail nozzle
Instruction manual
Safety instructions
Warranty card
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
Check the following:
• Make sure the voltage of the hot air gun
corresponds with the power voltage;
• Are the mains lead and the mains plug in
a good state: strong, without ravels or
damages.
Avoid the use of long extension cables;
Do not use the appliance under moist
circumstances;
The metal mouthpiece gets hot. Watch out
and do not touch the metal mouthpiece;
Prevent damage of the heating element. Do
not lock or block the mouth piece;
Do not leave the appliance when switched on;
Do not use the appliance for drying hair or for
drying living human beings in general;
Do not use the appliance in a bath, above
water or in spaces where easy inflammable
liquids are used.
EN
3