Abus HomeTec Pro CFA3100 Instrucciones De Montaje página 10

Possible uses and important information
1. 1.
HomeTec Pro
HomeTec Pro is an equipment kit for the motorized locking and unlocking
of inward-opening doors. The system consists of the door lock drive in
addition to other optional components. In order to use the door lock drive
as intended, you will need a Bluetooth
4.0 LE or higher), a currently supported iOS or Android software version and
the free ABUS HomeTec Pro app for iOS or Android.
Bluetooth ® door lock drive CFA3100
For the door lock drive to work, the cylinder must protrude 7-12 mm on the
inside of the door (plus the thickness of the fitting or collar). Because
the drive operates with a key permanently inserted in the lock, the cylin-
der must have an „emergency" feature on both sides where the door can
be closed from both sides even if another key is inserted on the opposite
side. In addition, the door lock must be a profile cylinder compliant with
DIN 18252. Please check the setup of your door and cylinder lock before
installation. Make sure that the door and cylinder are operating properly
and smoothly.
This product is designed for use in dry interior conditions only and may
not be installed on fire doors or emergency exits! The door lock drive can
not be used in conjunction with automatically locking mortise locks and
panic locks. The use on doors with automatically locking elements which
are activated exclusively via the lock latch and which do not include the
lock bolt is however possible.
Like all technical devices, HomeTec Pro can malfunction for a variety of rea-
sons. For this reason, you should always carry a key for the lock with you or
store it in a safe location that can be reached in the event of a fault (ABUS
KeyGarage, neighbour, office etc.) As before, the door can be opened from
the outside using the key. In the event of an emergency or panic situation,
a fault or dead batteries, the door can always be mechanically unlocked
from inside by hand using the operating wheel. Operation from outsi-
de by key or from inside by rotary wheel is only intended for emergency
situations. Continued use of a key from the outside can negatively affect
the lifespan of the profile cylinder. In order to use the system as intended,
all users should be given permission via the app or access via optional
components.
The contents of this installation and operating manual reflect the current
status at the time of printing. The printed manual may be outdated at
the time of the product's entry into service due to updates and further
developments.
We therefore ask you to visit our website
„CFA3100" into the search bar. You'll always find the current and complete
version of the installation and operating instructions on the product page
under the „Downloads" column.
The Bluetooth word mark and logos are registered trademarks owned by
®
Bluetooth SIG, Inc. and any use of such marks by ABUS August Bremicker
Söhne KG is under license. Other trademarks and brand names are those of
their respective owners.
Apple and the Apple logo are trademarks of Apple Inc., registered in the
U.S. and other countries and regions. App Store is a service mark of Apple
Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
18
-enabled smartphone (Bluetooth
®
and enter
2. Installation instructions
Icon Caution! Further
®
explana-
tion
2.1a
X
The locking cylinder must
project 7-12 mm on the
inside. If this projection can
be achieved by removing an
existing rosette (2.1b), the
cylinder must be replaced. It
must also be replaced if the
existing cylinder does not
have an emergency function!
2.1b
Door cylinder has to operate even
fitting / using with a key inserted on the inside.
details
X =
7 - 12 mm
Get your landlord's
permission, if necessary,
to replace the locking
cylinder, unless your
locking cylinder belongs
to a special master key
system. It may be that
there are master keys
for opening apartment
doors in an emergency
(e.g. at senior housing
facilities).
2.1c
X
X
X =
7 - 12 mm?
19