IMPEX Marcy NS-40504U Manual Del Usuario página 9

STEP-3
A.) NOTE: Extra help may be needed to hold the Front Post (#25) while connecting the cables
and wires.
B.) Insert Front Post (#25) through Front Post Cover (#26) and attach to the Main Frame (#1). Connect
the Upper Computer Wire (#31) from the bottom of the Front Post to the Lower Computer Wire
(#30) from the Main Frame.
C.) Pull the tension connector from the Upper Tension Cable (#20) and slide in between the opening
on the connector on the Lower Tension Cable (#21). Pull the Upper Tension Cable upward and
slide the wire through the slot on the bracket.
D.) Drop down the Upper Tension Cable so the fitting sits firmly on top of the bracket.
E.) Secure the Front Post to the Main Frame with four M8 x ⅝" Allen Bolts (#9), two Ø ⅝" Flat
Washers (#8) on the side, and two Ø ⅝" Curve Washers (#7) on the back side of Front Post.
© IMPEX INC.
8 www.marcypro.com