Operating And Functional Elements; Device Installation - Kärcher DS 2 Manual De Instrucciones

1 Button
2 Front part of the casing
3 Suction hose for detergent
4 Weight
5 Foot valve
6 Hook
7 Hose for detergent solution
8 Fastening hole
9 Outlet of detergent solution
10 Nozzle insert
11 Input of detergent
12 Floading ring
13 Water inlet
14 Locking
8

Operating and Functional Elements

Device installation

 Press on the lock and remove the cabi-
net front.
 Mark 3 fastening holes on the wall
through the back of the casing.
 Drill 3 holes with a diameter of 8 mm ap-
prox. 40 mm deep into the wall.
 Insert the included dowels all the way
into the holes.
 Screw the included screws into the top
two dowels.
 Hook the cabinet back onto the screws.
 Turn in the bottom screw and tighten all
the screws.
 Select the nozzle insert for the desired
mixing ratio:
– 2
EN