Publicidad
Enlaces rápidos
SC12 - SC14 - SC16 - SC18 - SC20 - M92722 - SC21 - CAM-MM-01
Parts List
60665 - 4.8x16 Rivet TLP/D 665
x4
60060
M6 S/S Nyloc Nut
60065
60068
6mm S/S Washer
Nut Cover
x8
* SC20 and M92722 only. For SC12, 14, 16, 18, 21: 60640 - M6x40 S/S Bolt
For CAM-MM-01: 60635 - M6x35 S/S Bolt
1
Tighten fasteners so that feet can still move to suit mast pro le.
M6x45 S/S Bolt
4x
(60072)*
6mm S/S Washer
8x
(60065)
M6 S/S Nyloc Nut
4x
(60060)
3
x12
*60072 - M6x45 S/S Bolt
x4
x4
x8
Foot
Foot
4x
02-07-19 Issue 7
60650 - 4.8x12 Rivet TLP/D 650
x1
72517 - Lacing Eye
S/S Safety Lanyard
(Pack Code - 70026)
2
4.8x16 Rivet TLP/D 665
12x
60665
Installation Instructions
Tools Required
ø3/16"(4.8mm)
2 x 10mm Spanner
x2
Power drill
Torque Wrench
Pop Rivet Gun
x1
(SC20 Mast Mount used in all illustrations)
ø3/16"(4.8mm)
12x
4
7Nm
7Nm
Mast Mount
x12
®
Publicidad
Manuales relacionados para Scanstrut SC12
Resumen de contenidos para Scanstrut SC12
- Página 1 Nut Cover (Pack Code - 70026) Foot * SC20 and M92722 only. For SC12, 14, 16, 18, 21: 60640 - M6x40 S/S Bolt (SC20 Mast Mount used in all illustrations) For CAM-MM-01: 60635 - M6x35 S/S Bolt Tighten fasteners so that feet can still move to suit mast pro le.
- Página 2 Important Notes This Scanstrut Mast Bracket is only designed to support Radomes as stated in Scanstrut Product Guide, under normal sailing conditions. Use of the bracket with unapproved products, or overloading, invalidates any bracket warranty. No liability is accepted for damage caused by incorrect installation. Product has been designed speci cally for the mounting of approved radar under normal sailing conditions.