Sears Kenmore 116.38099 Manual Del Propietário página 13

J
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
Frequently check and remove hair, string
and lint build-up in the brush area. tf
build-up becomes excessive, follow the
steps below, Should the belt become
loose or should it break, follow the Belt
Removal Instructions.
TO REMOVE NOZZLE COVER
Disconnect electrical supply.
To protect the floor surface, always place
paper under the nozzle any time the
nozzle cover is removed.
Release the nozzle cover by rotating the
nozzle cover retainers to the UNLOCK
position. Rotate upward and lift up on the
nozzle cover to remove it from the nozzle
base.
Nozzle
Cover
\
t
Nozzle Cover
Retainers
Carefully remove any residue that may exist
in the belt area.
• VARN NG ........
Personal Injury Hazard
Always unplug the vacuum cleaner
before cleaning the brush area as
agitator may suddenly restart.
Failure to do so can result in per-
sonal injury.
TO REMOVE BELT/CLEAN
AGITATOR
Agitator
Position hands on the agitator_ If the belt is
still attached to the agitator, there will be
tension on it,
Carefully lift the right end of the agitator and
then lift the left end,
Remove the worn or broken belt from the
motor drive shaft.
E
• WARNING
.............. !
Personal Injury Hazard
Be careful when removing the agita-
tor as the belt tension is high.
Failure to do so could result in per-
sonal injury from the agitator releas-
ing quickly and snapping away.
13