IOGear GHG600 Guia De Inicio Rapido página 4

Setup – PC
1. Connect the GHG600's 3.5mm plug to the 3.5mm jack on the PC Audio Adapter.
2. Connect the PC Audio Adapter's speaker plug (green band) to the PC's
speaker jack.
3. Connect the PC Audio Adapter's microphone plug (pink band) to the PC's
microphone jack.
Setup – PlayStation® 4
1. Connect the Kaliber Gaming PS4 audio adapter to the PS4 controller.
2. Connect the GHG600's 3.5mm plug to the 3.5mm jack on the PS4 audio adapter.
3. Install the boom microphone.
4. On the PS4 console go to Settings> Devices> Audio Devices:
a. Set Input & Output Device to Headset Connected to Controller.
b. Set Output to Headphones to All Audio.
c. Set Volume Control (Headphones) to maximum.
d. Adjust Microphone Level.
Adjust headphone level as needed using the volume
control on the PS4 audio adapter.
SHARE OPTIONS
+ +
MIC ON MIC ON
3