IOGear GHG600 Guia De Inicio Rapido página 5

Installation - Xbox One
1. Connect the GHG600's 3.5mm plug to the 3.5mm jack on the
Xbox One controller.*
™
2. Install the boom microphone.
3. On the Xbox One
Accessories> Xbox One Wireless Controller>Volume.
a. Make sure Headset Mic is set to On.
b. Adjust Headset Volume as needed.
Note: The GHG600 works with the new Xbox One
Controllers without the 3.5mm jack require the Xbox One
Adapter (not included).
™
console go to Settings> Kinect & Devices> Devices and
™
Y
X
A
Xbox One Stereo Headset
Adapter not included
controllers with a 3.5mm jack.
™
B
4
Stereo Headset
™