Operation; Preparation; Blending - Beko HBS6700W Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
3

Operation

3.1 Preparation

1. Remove all packaging and sticker materials
and dispose of them according to the
applicable legal regulations.
2. Before using the appliance for the first time,
clean parts which come into contact with food
(see the "Cleaning and care" section).
3. Cut the food into small pieces before
processing with the appliance.

3.2 Blending

1. Put the food that you would like to puree or
mix in the measuring beaker (6) or a similar
bowl.
2. Attach the blending attachment (5) to the
motor unit (3) by pushing the attachment to
the motor until it locks. Make sure the blending
attachment is properly attached to the motor
unit.
3. Insert the plug into the wall socket.
4. Immerse the blending attachment (5) in
the measuring beaker (6), that contains the
ingredients to be blended.
To prevent the ingredients from
C
splashing, do not press the On/Off
button (1) or turbo button (2) until
the blending attachment has been
immersed in the ingredients.
5. Press and hold down the On/Off button (1).
– The appliance starts operating.
C
The processing time for about
100-400 ml of baby food or soup is
20 seconds.
6. Move the appliance slowly up and down and in
circles to blend the ingredients.
C
Always switch off the appliance
before taking out the processed
food.
Hand Blender / User Manual
7. Release the On/Off button (1) or turbo button
(2) when you are finished and disconnect the
power plug from the wall socket. Remove the
mixture from the measuring beaker (6).
8. Disassemble the blending attachment (5) only
by pushing the attachment release buttons (4)
at the sides of the appliance and pulling it off
from the motor unit.
C
To prevent overheating do not
operate the appliance continuously
for more than 10 seconds.
C
Never switch on the appliance
for longer than necessary for
processing the food.
To prevent overflowing of the
C
mixture do not overfill the measuring
beaker (6) or bowl. Smaller amounts
are easier to process.
C
To prevent any accidents use the
beaker lid as anti-slip rubber pad by
putting the beaker base on the lid.
If you would like to use the blending
C
attachment directly in the pot, first
take the pot off the stove to prevent
the blending attachment from
overheating.
7 / 55 EN

Publicidad

Tabla de contenido
loading

Tabla de contenido